Raise3D Industrial PET Support Filament 1kg (1.75mm)

Raise3D Industrial PET Support Filament is a breakaway support material specifically designed for FFF printing with fiber-reinforced filaments. Unlike print supports made of the same material, PET filament is easier to remove and enables detailed surface quality and dimensional accuracy. Compared to water-soluble substrates, the lower moisture absorption and performance-to-cost ratio of PET substrates make it an ideal alternative to BVOH or PVA.

• Cost-effective
• Easy and quick removal with tools.
• No special finishing required
• Wide compatibility with other printing filaments.
• Compatibility: PET CF, PET GF, and other CF filaments.

Applications：

• Carrier material for PET CF& PET GF
• For large overhangs and voids
• Easy to remove
• Smooth and clean carrier surface

Print settings:

Nozzle temperature (°C): 260-300
Print speed (mm/s): 35-120
Build platform temperature (°C): 60-800
Cooling Fan (%): At
Thickness of individual layers (mm): 0.1-0.25
Drying temperature (°C): 70-80

Print Notes:

1. It is recommended to use a hardened steel, tungsten steel or ruby nozzle to avoid nozzle abrasion.
2. Dry the PET support at 70-80 °C for 8-12 hours before printing, as low moisture content is critical to the quality of the printed parts.
3. PET support is sensitive to moisture and should be stored and used in dry conditions (ambient humidity below 15%).