DimaFix Spray 400ml

In order to achieve a good adhesion during printing and to fix your object during printing and thus avoid possible distortion, the use of DimaFix is recommended. DimaFix is an aerosol spray adhesive for 3D printers that have a heated printing bed. The bed should be heated up to over 60°C to develop the effect of DimaFix. Below 60ºC DimaFix is inactive. The adhesive aerosol spray then creates a strong bond between the glass of the printing bed and the first layer of plastic of your print model. The adhesive spray is completely water soluble, so cleaning the construction panel afterwards is easy.

When using materials such as ABS, CPE +, PC or PP that require a higher printing bed temperature, Dimafix is a very good solution. The maximum adhesion range is between 90° and 140°C. Different printing bed temperatures result in different degrees of adhesion:

Different printing bed temperatures lead to different adhesion values:

• Below 60ºC: Low adhesion, the objects can be detached from the plate.
• 60 - 75ºC: Medium adhesion, for simple geometries.
• 75 - 95ºC: High adhesion, for complex geometries and long prints.
• Above 95ºC: Very high adhesion, for very complex geometries and very long prints.