Bambu Lab Complete hotend assembly with hardened steel nozzle - P1 Series
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: FAH004P
- EAN: 6975337031666
- commodity code: 84779080
Bilder zur Sicherheit | Kontakte
Exclusive to P1 Series
Highlights of Different Nozzle Diameters
0.2mm Nozzle
Optimal Print Fineness
Extremely small layer gaps
Detailed on the vertical printing surface
0.6mm and 0.8mm Nozzle
Faster Printing Speed
A larger diameter extrudes more filaments per second, resulting in faster printing speed
0.4mm Nozzle
Optimal Print Quality and Printing Speed
The 0.4mm nozzle is widely regarded as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and printing speed. This nozzle size is used in both the Bambu Lab X1 series and the P1 series 3D printers.
Filament Compatibility
| Material | 0.2mm Nozzle | 0.4mm Nozzle | 0.6mm Nozzle | 0.8mm Nozzle | Hardened Steel Required? |
| General PLA | YES | YES | YES | YES | Optional |
| Wood/Stone/Metal-filled PLA | *NO | YES | YES | YES | Optional |
| PETG | YES | YES | YES | YES | Optional |
| PVA | YES | YES | YES | YES | Optional |
| ABS | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| ASA | YES | YES | YES | YES | Optional |
| PC | YES | YES | YES | YES | Optional |
| PA | *NO | YES | YES | YES | Optional |
| TPU | *NO | YES | YES | YES | Optional |
| Bambu PLA-CF | *NO | *Highly Recommended | YES | YES | *Required |
| Bambu PETG-CF | *NO | *Highly Recommended | YES | YES | *Required |
| Bambu PAHT-CF | *NO | YES | *Highly Recommended | YES | *Required |
| Bambu PET-CF | *NO | YES | *Highly Recommended | YES | *Required |
| CF Filaments from other brands | *NO | Not recommended | YES | YES | *Required |
[*Note]
- Filaments with carbon fiber, glass fiber, metal, or other inorganic particles tend to clog. 0.2mm nozzle.
- For filaments containing carbon or glass fibers, it is highly recommended to use a hardened steel 0.6mm nozzle to minimize the risk of clogging and abrasion.
- Bambu PLA-CF and Bambu PETG-CF have been extensively tested and have proven to have a low risk of clogging when printed with a hardened steel 0.4mm nozzle while achieving higher print quality simultaneously.
For more information on filament compatibility, please refer to the Bambu Lab Wiki.
Bambu Hotend Configuration
If you need to replace your nozzle, you can either replace the hotend with nozzle on your original complete hotend assembly or replace the entire complete hotend assembly.
In the Box
- Complete Hotend Assembly – P1 Series
– M3-14 Step Screws * 2
Compatibility
Exclusive to P1 Series
| Especially for: | Bambu Lab P1 Series |
