Polymaker PolyMax™ PC-FR Filament True White 1000g

Nozzle Temperature:
250˚C – 270˚C

Printing Speed:
30 – 50mm/s

Bed Temperature:
90˚C – 105˚C

Chamber Temperature:
90˚C – 100˚C

Bed Surface:
almost any surface with a thin coat of MAGIGOO PC

Cooling Fan:
OFF

Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different printers and nozzle diameters

Young’s Modulus:
2634 ± 182 (MPa)

Tensile Strength:
67 ± 4.5 (MPa)

Bending Strength:
96.6 ± 1.3 (MPa)

Charpy Impact Strength:
11.7 ± 1.3 (kJ/m2)

Glass Transition Temperature:
N/A

Vicat Softening Temperature:
116˚C

Drying Settings:
80˚C for 8h

Recommended Support Materials:
PolyDissolve™ S2 (coming soon)

Other:
When printing with PolyMax™ PC-FR it is recommended to use a heated chamber.
It is recommended to anneal the printed part right after the printing process to release the residual internal stress when not using a heated chamber.
Annealing settings: 100˚C for 2h

TDS:
DOWNLOAD

SDS:
DOWNLOAD

PIS:
DOWNLOAD