3DSolex CHT MATCHLESS Nozzle 1.75 - 0,40mm

68 verfügbar
3DSolex CHT MATCHLESS Nozzle 1.75 - 0,40mm
16,66 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
Artikelbestand: 68 verfügbar

  • 3dsol4nm
  • 84779080
  • 7072482002028
Fits: Raise3D N1 / N2, Prusa I3 MK3, ... Nozzle diameter: 0,40mm Filament diameter: 1,75mm... mehr
Produktinformationen "3DSolex CHT MATCHLESS Nozzle 1.75 - 0,40mm"

Fits: Raise3D N1 / N2, Prusa I3 MK3, ...

Nozzle diameter: 0,40mm

Filament diameter: 1,75mm

 

Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.

Available Nozzles

0.25 mm (not Matchless, as the core heating will have little effect at the low throughput of this tiny nozzle)

0.40 mm (Matchless; core heating)

0.60 mm (Matchless; core heating)

0.80 mm (Matchless; core heating)

The nozzles are brass, and are coated with a layer to prevent them from reacting with the aluminium block.
This ensures that you can change nozzles without fear of destroying the heater block.

Tools

Recommended tool: Nozzle Changer for Prusa I3

What it does

This Nozzle allows “volcano-speeds” by just changing the nozzle (0.25 makes no difference). The Matchless nozzles, patented by 3D Solex, have a melting zone much bigger than an ordinary nozzle. An ordinary nozzle is melting the filament from the “outside” and trying to push the coldest part (centre of filament) through the exit hole of the nozzle.
The core heating effect of the Matchless nozzles is melting the middle  of the filament, that part which you wish to push out through the nozzle.

What the others must do: Lengthening the heating zone, which has a negative effect on retractions, adds weight to the head and is costly.

Advantages

1) You can now change nozzle risk free and hazzle free, by using the tool available separately. Change nozzle in seconds, without risk of destroying the sensors of the printer or the heat break.

2) Print with a much higher troughput, by configuring a combination of :

a) nozzle size

b) layer height

c) printing speed.

3) Print with a lower temperature. Since you are effectively melting the plastic you can print at a lower temperature than before. Using the existing settings of your previous print, you can lower 5-15 C.

4) Wide range of nozzles sizes (mm) available from 3D Solex:

0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.2, 1.5, 2.0

Example: You can now print a vase with a 0.80mm nozzle at the same or higher speed than you could using a 0.40mm nozzle previously. This way you only need 1 pass to make a 0.8mm wall.

 

Weiterführende Links zu "3DSolex CHT MATCHLESS Nozzle 1.75 - 0,40mm"
13 verfügbar
20 verfügbar
PolyTerra Mint Polymaker PolyTerra PLA Mint 1,75mm 1kg
Inhalt 1000 Gramm
19,65 € *
2 verfügbar
PolyTerra Peach Polymaker PolyTerra PLA Peach 1,75mm 1kg
Inhalt 1000 Gramm
19,65 € *
36 verfügbar
48 verfügbar
5 - 10 Tage Lieferzeit
11 verfügbar
119 verfügbar
5-15 Tage Lieferzeit
4 verfügbar
5 verfügbar
3 verfügbar
40 verfügbar
Polymaker PolyLite ABS Filament True Black 1,75mm 1000g Polymaker PolyLite ABS Filament True Black...
Inhalt 1000 Gramm
ab 29,45 € *
5 verfügbar
Polymaker PolyLite PC Filament Transparent 1,75mm 1000g Polymaker PolyLite PC Filament Transparent...
Inhalt 1000 Gramm
ab 34,36 € *
164 verfügbar
3 verfügbar
TIPP!
5-10 Tage Lieferzeit
164 verfügbar
65 verfügbar
119 verfügbar
3 verfügbar
TIPP!
80-120 Tage Lieferzeit
5-10 Tage Lieferzeit
5-10 Tage Lieferzeit
25-30 Tage Lieferzeit
Delta WASP 2040 PRO Delta WASP 2040 PRO
2.820,30 € *
5-10 Tage Lieferzeit
Zuletzt angesehen