3DSolex CHT Matchless Nozzle 1.75 - 0,40mm

6 verfügbar
3DSolex CHT Matchless Nozzle 1.75 - 0,40mm
16,66 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

  • 6 verfügbar
  • 3dsol4nm
  • 7072482002028
  • 84779080
Fits: Raise3D N1 / N2 Nozzle diameter: 0,40mm Filament diameter: 1,75mm   Ramp up... mehr
Produktinformationen "3DSolex CHT Matchless Nozzle 1.75 - 0,40mm"

Fits: Raise3D N1 / N2

Nozzle diameter: 0,40mm

Filament diameter: 1,75mm

 

Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.

Available Nozzles

0.25 mm (not Matchless, as the core heating will have little effect at the low throughput of this tiny nozzle)

0.40 mm (Matchless; core heating)

0.60 mm (Matchless; core heating)

0.80 mm (Matchless; core heating)

The nozzles are brass, and are coated with a layer to prevent them from reacting with the aluminium block.
This ensures that you can change nozzles without fear of destroying the heater block.

Tools

Recommended tool: Nozzle Changer for Prusa I3

What it does

This Nozzle allows “volcano-speeds” by just changing the nozzle (0.25 makes no difference). The Matchless nozzles, patented by 3D Solex, have a melting zone much bigger than an ordinary nozzle. An ordinary nozzle is melting the filament from the “outside” and trying to push the coldest part (centre of filament) through the exit hole of the nozzle.
The core heating effect of the Matchless nozzles is melting the middle  of the filament, that part which you wish to push out through the nozzle.

What the others must do: Lengthening the heating zone, which has a negative effect on retractions, adds weight to the head and is costly.

Advantages

1) You can now change nozzle risk free and hazzle free, by using the tool available separately. Change nozzle in seconds, without risk of destroying the sensors of the printer or the heat break.

2) Print with a much higher troughput, by configuring a combination of :

a) nozzle size

b) layer height

c) printing speed.

3) Print with a lower temperature. Since you are effectively melting the plastic you can print at a lower temperature than before. Using the existing settings of your previous print, you can lower 5-15 C.

4) Wide range of nozzles sizes (mm) available from 3D Solex:

0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.2, 1.5, 2.0

Example: You can now print a vase with a 0.80mm nozzle at the same or higher speed than you could using a 0.40mm nozzle previously. This way you only need 1 pass to make a 0.8mm wall.

 

Weiterführende Links zu "3DSolex CHT Matchless Nozzle 1.75 - 0,40mm"
50 verfügbar
10 verfügbar
4 verfügbar
95 verfügbar
27 verfügbar
5-10 Tage Lieferzeit
- 20.71 %
13 verfügbar
- 6.98 %
TreeD FLEXMARK 7 TPU 1,75mm– 500g - 70 Shore A TreeD FLEXMARK 7 TPU 1,75mm– 500g - 70 Shore A
Inhalt 500 Gramm
39,99 € * 42,99 € *
30 verfügbar
9 verfügbar
- 25.02 %
18 verfügbar
5 - 10 Tage Lieferzeit
Polymaker PolyTerra PLA Fossil Grey Polymaker PolyTerra PLA Fossil Grey
Inhalt 1000 Gramm
ab 19,65 € *
9 verfügbar
44 verfügbar
65 verfügbar
37 verfügbar
123 verfügbar
5 verfügbar
4 verfügbar
66 verfügbar
5-10 Tage Lieferzeit
7 verfügbar
39 verfügbar
5 - 10 Tage Lieferzeit
40 verfügbar
43 verfügbar
Bundle Angebot
Raise3D Hyper Speed Filament Bundle Raise3D Hyper Speed Filament Bundle
Inhalt 4000 Gramm
171,36 € *
6 verfügbar
2 verfügbar
- 27.39 %
polymaker-polylite-pla-cf-black Polymaker PolyLite™ PLA-CF Black 1,75mm 1000g
Inhalt 1000 Gramm
24,95 € * 34,36 € *
5-15 Tage Lieferzeit
- 4.96 %
Polymaker PolyLite PETG Dark Green Polymaker PolyLite PETG Dark Green 1,75mm 1000g
Inhalt 1000 Gramm
27,99 € * 29,45 € *
2 verfügbar
- 2.5 %
Polymaker PolyTerra PLA Muted Blue Polymaker PolyTerra PLA Muted Blue 1,75mm 1000g
Inhalt 1000 Gramm
19,49 € * 19,99 € *
10 verfügbar
- 2.5 %
Polymaker PolyTerra PLA Muted Green Polymaker PolyTerra PLA Muted Green 1,75mm 1000g
Inhalt 1000 Gramm
19,49 € * 19,99 € *
29 verfügbar
7 verfügbar
Versandkostenfrei
Kimya PETG-S Gelb Transluzent 1,75 mm Kimya PETG-S Gelb Transluzent 1,75 mm
Inhalt 750 Gramm
20,98 € *
3 verfügbar
- 5.12 %
Bundle Angebot
30-45 Tage Lieferzeit
48 verfügbar
Versandkostenfrei
- 15.98 %
TIPP!
Bundle Angebot
3 verfügbar
Extrudr PCTG Black 1,75mm 800g Extrudr PCTG Black 1,75mm 800g
Inhalt 800 Gramm
29,74 € *
3 verfügbar
Extrudr PCTG Transparent 1,75mm 800g Extrudr PCTG Transparent 1,75mm 800g
Inhalt 800 Gramm
29,74 € *
5 verfügbar
Extrudr PCTG Blue 1,75mm 800g Extrudr PCTG Blue 1,75mm 800g
Inhalt 800 Gramm
29,74 € *
40 verfügbar
- 0.81 %
Polymaker PolyTerra PLA Army Dark Green 1,75mm 1000g Polymaker PolyTerra PLA Army Dark Green 1,75mm...
Inhalt 1000 Gramm
19,49 € * 19,65 € *
5 - 10 Tage Lieferzeit
- 0.81 %
Polymaker PolyTerra PLA Wood Brown 1,75mm 1000g Polymaker PolyTerra PLA Wood Brown 1,75mm 1000g
Inhalt 1000 Gramm
19,49 € * 19,65 € *
8 verfügbar
- 0.81 %
Polymaker PolyTerra PLA Peanut 1kg 1,75mm Polymaker PolyTerra PLA Peanut 1,75mm 1000g
Inhalt 1000 Gramm
19,49 € * 19,65 € *
1 verfügbar
- 0.81 %
Polymaker PolyTerra PLA Earth Brown 1,75mm 1000g Polymaker PolyTerra PLA Earth Brown 1,75mm 1000g
Inhalt 1000 Gramm
19,49 € * 19,65 € *
10 verfügbar
- 1.08 %
Polymaker PolyLite PLA PRO Teal 1,75mm 1000g Polymaker PolyLite PLA PRO Teal 1,75mm 1000g
Inhalt 1000 Gramm
33,99 € * 34,36 € *
9 verfügbar
- 1.08 %
Polymaker PolyLite PLA PRO Orange 1,75mm 1000g Polymaker PolyLite PLA PRO Orange 1,75mm 1000g
Inhalt 1000 Gramm
33,99 € * 34,36 € *
10 verfügbar
- 1.08 %
Polymaker PolyLite PLA PRO Green 1,75mm 1000g Polymaker PolyLite PLA PRO Green 1,75mm 1000g
Inhalt 1000 Gramm
33,99 € * 34,36 € *
5-10 Tage Lieferzeit
- 27.39 %
Polymaker PolyLite PLA PRO Grey 1000g Polymaker PolyLite PLA PRO Grey 1000g
Inhalt 1000 Gramm
ab 24,95 € * 34,36 € *
1 verfügbar
5-10 Tage Lieferzeit
8 verfügbar
PolyTerra PLA Plus Green Polymaker PolyTerra PLA+ Green 1kg
Inhalt 1000 Gramm
23,59 € *
Zuletzt angesehen