PolyFlex in 1,75mm und 750g von PolyMaker

49,95 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

PolyFlex Farben:

  • PM70106-white
PolyFlex PolyFlex™ ist ein sehr flexibles und gleichzeitig einfach druckbares Filament. Dank... mehr
Produktinformationen "PolyFlex in 1,75mm und 750g von PolyMaker"

PolyFlex

PolyFlex™ ist ein sehr flexibles und gleichzeitig einfach druckbares Filament. Dank seiner Eigenschaften eröffnet PolyFlex ganz neue Möglichkeiten.

Durchmesser: 1,75mm

Menge: 750g

Farbe: bitte auswählen

Flex Feature icons_opt Flexible : PolyFlex™ features a “Shore A” hardness of 90-95A and a large strain-to-failure of over 400%. These aren’t just figures on a page, but are tested values obtained from actual printed parts. What this means is that PolyFlex™ gives you cool flexible parts with no worry about the part breaking. PolyFlex™ is truly your best tool for creating fun flexible parts.
Printer Friendly Feature icons_opt Printer Compatibility: One of our main goals when developing PolyFlex™ was to make it easy for everyone to use. Flexible filaments are known to be difficult to work with. Well not any more. PolyFlex™ is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.
Flex up imagination Feature icons_opt Flex-up Your Imagination : The soft and flexible nature of PolyFlex™ opens up a new dimension of what one can do with desktop 3D printers, clothing, shoes, wearables, prosthetics…you name it. The possibilities are endless.

Technische Daten:

Glass Transition Temp
N/A

Density
1.17 – 1.24 g/cm3

Diameters
1.75 mm or 2.85 mm

Tolerance
± 0.05 mm
50 Microns
(Typical ~ ± 0.02 mm )

Recommended printing temperature:
220 – 235 °C (Diameter of 1.75 mm)
220 – 235 °C (Diameter of 2.85 mm)

Recommended 3D print speed:
30 – 90 mm/s

Recommended heated bed temperature
Not Required

Build platform
All our products work well with common build plate surfaces such as the blue tape, Kapton tape, glass, etc. However for the best user experience, we recommend that you use our materials with BuildTak™, a build plate surface designed specifically for desktop FDM/FFF printers.

Datenblatt

 
Weiterführende Links zu "PolyFlex in 1,75mm und 750g von PolyMaker"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "PolyFlex in 1,75mm und 750g von PolyMaker"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zahlenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

Zortrax M300 3D-Drucker V01 Zortrax M300 3D-Drucker V01
4.509,00 € * 4.758,81 € *
Zuletzt angesehen