WASP Clay Kit 3.0 - TANK 3l with set of nozzles (0,7...3mm) + 12,5 Kg Clay

821,10 € *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit ca. 5 Tage

  • 0 verfügbar
  • WASPP018
  • 84779080
WASP Clay Kit 3.0 - TANK 3l with set of nozzles (0,7...3mm) + 12,5 Kg Clay Fits for: 2040 Pro... mehr
Produktinformationen "WASP Clay Kit 3.0 - TANK 3l with set of nozzles (0,7...3mm) + 12,5 Kg Clay"

WASP Clay Kit 3.0 - TANK 3l with set of nozzles (0,7...3mm) + 12,5 Kg Clay

Fits for: 2040 Pro / 4070 Pro / 60100

 

 

 

WASP launch a new professional CLay Kit with clay extruder, LDM WASP Extruder 3.0 for fluid-dense and ceramic materials.

 

Innovation

  • bubble eliminating extruder, it eliminates air bubbles in the mixture
  • extrusion controlling system with retraction option
  • outward pressure multiplier

 

The new WASP Clay Kit includes a 3 litre Tank (on specific request to info@3dwasp.com and with the payment of a supplement, a tank with a capacity of 5 liters is available). The preceding needle experimental models did not allow middle size printing because of the limited amount of mixture they could contain. The tank can be refilled or cleaned simply by opening the caps located at the extremes. Inside, there is a piston with two 4 bar gaskets which pushes the material through the teflon pipe (diameter 12 mm) which supplies the extruder. The cap located on the back has a safety valve set at 8 bar.

This technology allows the air to outflow upward , eliminating the probability of finding bubbles inside the mixture. Like for a common pressure extruder, if there were bubbles the flow would be interrupted and the print would be damaged. Furthermore, thanks to the screw, the density of the printing materials is higher. This allows to reduce the time for their change of state, from liquid to solid, thus eliminating the risk of collapse of the printed object. In case the screw or the chamber were damaged they can be easily substituted.

LDM WASP Extruder

LDM (liquid deposit modeling) is the name of the new WASP Extruder 3.0 for ceramic materials that can be adapted to most of the 3D printers on the market.

WASP’s work has always been focused on the development of systems that allow the use of functional materials like ceramics, porcelain, clay, alumine, zirconium and advanced ceramics, in order to promote digital handicraft and self-production. By launching this new product the group aims to promote the print of fluid-dense materials and advanced ceramics in the world.

In two years of time and after experimenting all the possible combinations of pressure, nozzles and materials WASP has created a model of extruder which is able to interrupt and restart the extrusion flow.

LDM Wasp Extruder 3.0 is a professional clay extruder for the deposition of dense fluid material as clay mixture and experimental materials. It is equipped with a screw system capable of regulating the output flow of the material, allowing a rapid flow interruction and a good retraction control.

The extruder for fluid-dense materials, easily combinable with all WASP 3D printers. Ideal for clay, ceramic, porcelain, allumina, zirconia and advanced ceramics. Developed to support digital craftsmanship and self productions.

Adaptability to other machines

WASP Clay Kit was created to be installed on WASP printers, but can be adapted to most of the existing machines. 

It is very easy to install WASP LDM Extruder 3.0 on other machines. Firstly, it is necessary to print the supporting cover (the source files are provided by WASP). Secondly, the extruder must be linked to the wire and the “number of steps per millimeter” must be set to 400. This configurations are provided by the most common slicing softwares, like Slic3r or Cura.

 

WASP Clay Kit 2.0 includes aluminium 3 l. Tank, porcelain and LDM WASP Extruder 3.0. Compressor is not included. It’s possible to connect any compressor with  at least 8 bar pressure value.

The pipe which connects the 3D printer to the air compressor is not supplied by WASP. 

A useful tip: It’s a nylon pipe and it’s a tool generally supplied by the air compressor supplier. If you don’t have it you can buy it from any hardware store of the length you need, ask for an 8 mm (external dimension) nylon pipe.

 

Packaging

Dimensions:

  • box 1: 23cm 51cm h12.5cm (12.5 kg di argilla)
  • box 2: 23cm 51cm h12.5cm (componenti kit)
  • Wounded together: 23cm x 51cm x h25cm peso 18kg

KIT INCLUDES

  • Extruder with screw control
  • A high-couple stepper engine
  • Engine cooling fan
  • Bearing seal
  • Stainless steel Nozzle diameter 1.5mm, 2mm, 3mm
  • Plastic nozzle with Luer lock adapter: 0.8mm, 1.2mm, 1.5mm
  • Loading dima
  • Support for Delta or Powerwasp (on request)

Tank

  • Aluminium Tank 3 l
  • Aluminium closure lids
  • A return preventing valve
  • Nylon piston
  • Fittings
  • A stand for the tank

Stand for the Tank

  • Nylon supports for 3l Tank
  • Bar fittings
  • Tap
  • A pressure reducer
  • A safety valve

OTHER

  • Teflon connecting tube
  • Nylon connecting tube
  • 12 kg of RED EARTHENWARE Clay Mixture
  • Manual
  • SD card with files and configurations

NOTE

Pay attention: Others printer machines must be adapted to be used with our WASP Clay Kit.

 

Speziell für: WASP 2040 PRO, WASP 4070 PRO, WASP 60100
Weiterführende Links zu "WASP Clay Kit 3.0 - TANK 3l with set of nozzles (0,7...3mm) + 12,5 Kg Clay"
Zuletzt angesehen