3DSolex CHT Matchless Nozzle 1.75 - 0,60mm

24 verfügbar
3DSolex CHT Matchless Nozzle 1.75 - 0,60mm
16,66 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
Artikelbestand: 24 verfügbar

  • 24 verfügbar
  • 3dsol6nm
  • 7072482002035
  • 84779080
Fits: Raise3D N1 / N2 Nozzle diameter: 0,60mm Filament diameter: 1,75mm   Ramp up... mehr
Produktinformationen "3DSolex CHT Matchless Nozzle 1.75 - 0,60mm"

Fits: Raise3D N1 / N2

Nozzle diameter: 0,60mm

Filament diameter: 1,75mm

 

Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.

Available Nozzles

0.25 mm (not Matchless, as the core heating will have little effect at the low throughput of this tiny nozzle)

0.40 mm (Matchless; core heating)

0.60 mm (Matchless; core heating)

0.80 mm (Matchless; core heating)

The nozzles are brass, and are coated with a layer to prevent them from reacting with the aluminium block.
This ensures that you can change nozzles without fear of destroying the heater block.

Tools

Recommended tool: Nozzle Changer for Prusa I3

What it does

This Nozzle allows “volcano-speeds” by just changing the nozzle (0.25 makes no difference). The Matchless nozzles, patented by 3D Solex, have a melting zone much bigger than an ordinary nozzle. An ordinary nozzle is melting the filament from the “outside” and trying to push the coldest part (centre of filament) through the exit hole of the nozzle.
The core heating effect of the Matchless nozzles is melting the middle  of the filament, that part which you wish to push out through the nozzle.

What the others must do: Lengthening the heating zone, which has a negative effect on retractions, adds weight to the head and is costly.

Advantages

1) You can now change nozzle risk free and hazzle free, by using the tool available separately. Change nozzle in seconds, without risk of destroying the sensors of the printer or the heat break.

2) Print with a much higher troughput, by configuring a combination of :

a) nozzle size

b) layer height

c) printing speed.

3) Print with a lower temperature. Since you are effectively melting the plastic you can print at a lower temperature than before. Using the existing settings of your previous print, you can lower 5-15 C.

4) Wide range of nozzles sizes (mm) available from 3D Solex:

0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.2, 1.5, 2.0

Example: You can now print a vase with a 0.80mm nozzle at the same or higher speed than you could using a 0.40mm nozzle previously. This way you only need 1 pass to make a 0.8mm wall.

 

Weiterführende Links zu "3DSolex CHT Matchless Nozzle 1.75 - 0,60mm"
73 verfügbar
15-25 Tage Lieferzeit
5-10 Tage Lieferzeit
17 verfügbar
39 verfügbar
20 verfügbar
PolyTerra Sunrise-Orange Polymaker PolyTerra PLA Sunrise Orange 1kg
Inhalt 1000 Gramm
19,65 € *
8 verfügbar
PolyTerra Fossil-Grey Polymaker PolyTerra PLA Fossil Grey 1kg
Inhalt 1000 Gramm
19,65 € *
4 verfügbar
6 verfügbar
184 verfügbar
23 verfügbar
5-10 Tage Lieferzeit
8 verfügbar
Polymaker PC-FR Filament True Black 1000g Polymaker PC-FR Filament True Black 1000g
Inhalt 1000 Gramm
55,99 € * 58,95 € *
8 verfügbar
3D-Solex-Raise3D-PRO2-E2-0.25 3DSolex Nozzle für Raise3D PRO2 / PRO3 / E2...
Inhalt 2 Stück
41,99 € * 42,84 € *
19 verfügbar
3 verfügbar
PolyMaker PolyMax PLA Teal in 750g PolyMaker PolyMax PLA Teal in 750g
Inhalt 750 Gramm
44,20 € *
64 verfügbar
10 verfügbar
23 verfügbar
8 verfügbar
3D-Solex-Raise3D-PRO2-E2-0.25 3DSolex Nozzle für Raise3D PRO2 / PRO3 / E2...
Inhalt 2 Stück
41,99 € * 42,84 € *
10-15 Tage Lieferzeit
10-15 Tage Lieferzeit
15-25 Tage Lieferzeit
5-10 Tage Lieferzeit
5-10 Tage Lieferzeit
PolyMide_PA6-CF_-Black_175_Spool PolyMide PA6-CF Filament Black 500g
Inhalt 500 Gramm
54,99 € *
12 verfügbar
PolyFlex-TPU95-HF-White PolyMaker PolyFlex TPU95-HF White 1000g
Inhalt 1000 Gramm
49,12 € *
56 verfügbar
PolyTerra Arctic-Teal Polymaker PolyTerra PLA Arctic Teal 1kg
Inhalt 1000 Gramm
19,65 € *
8 verfügbar
PolyTerra Fossil-Grey Polymaker PolyTerra PLA Fossil Grey 1kg
Inhalt 1000 Gramm
19,65 € *
PolyMaker PolyFlex TPU90 Teal PolyMaker PolyFlex TPU90 Teal 750g
Inhalt 750 Gramm
39,29 € *
PolyMaker PolyFlex TPU90 Grey PolyMaker PolyFlex TPU90 Grey 750g
Inhalt 750 Gramm
39,29 € *
5-10 Tage Lieferzeit
Polymaker_PC-PBT_Black_175_Spool_Picture_Asymmetric-2-700x700 Polymaker PC-PBT Filament Schwarz 1000g
Inhalt 1000 Gramm
55,99 € * 58,96 € *
30 verfügbar
ProFila ULTRA X grau Filament 1,75mm 1,0kg ProFila ULTRA X grau Filament 1,75mm 1,0kg
Inhalt 1000 Gramm
42,84 € *
5-15 Tage Lieferzeit
5-10 Tage Lieferzeit
8 verfügbar
Polymaker PC-FR Filament True Black 1000g Polymaker PC-FR Filament True Black 1000g
Inhalt 1000 Gramm
55,99 € * 58,95 € *
Zuletzt angesehen