3DSolex CHT Matchless Nozzle 1.75 - 0,25mm

5 verfügbar
3DSolex CHT Matchless Nozzle 1.75 - 0,25mm
16,66 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
Artikelbestand: 5 verfügbar

  • 5 verfügbar
  • 3dsol2nm
  • 7072482002011
  • 84779080
Fits: Raise3D N1 / N2 Nozzle diameter: 0,25mm Filament diameter: 1,75mm   Ramp up... mehr
Produktinformationen "3DSolex CHT Matchless Nozzle 1.75 - 0,25mm"

Fits: Raise3D N1 / N2

Nozzle diameter: 0,25mm

Filament diameter: 1,75mm

 

Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.

Available Nozzles

0.25 mm (not Matchless, as the core heating will have little effect at the low throughput of this tiny nozzle)

0.40 mm (Matchless; core heating)

0.60 mm (Matchless; core heating)

0.80 mm (Matchless; core heating)

The nozzles are brass, and are coated with a layer to prevent them from reacting with the aluminium block.
This ensures that you can change nozzles without fear of destroying the heater block.

Tools

Recommended tool: Nozzle Changer for Prusa I3

What it does

This Nozzle allows “volcano-speeds” by just changing the nozzle (0.25 makes no difference). The Matchless nozzles, patented by 3D Solex, have a melting zone much bigger than an ordinary nozzle. An ordinary nozzle is melting the filament from the “outside” and trying to push the coldest part (centre of filament) through the exit hole of the nozzle.
The core heating effect of the Matchless nozzles is melting the middle  of the filament, that part which you wish to push out through the nozzle.

What the others must do: Lengthening the heating zone, which has a negative effect on retractions, adds weight to the head and is costly.

Advantages

1) You can now change nozzle risk free and hazzle free, by using the tool available separately. Change nozzle in seconds, without risk of destroying the sensors of the printer or the heat break.

2) Print with a much higher troughput, by configuring a combination of :

a) nozzle size

b) layer height

c) printing speed.

3) Print with a lower temperature. Since you are effectively melting the plastic you can print at a lower temperature than before. Using the existing settings of your previous print, you can lower 5-15 C.

4) Wide range of nozzles sizes (mm) available from 3D Solex:

0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.2, 1.5, 2.0

Example: You can now print a vase with a 0.80mm nozzle at the same or higher speed than you could using a 0.40mm nozzle previously. This way you only need 1 pass to make a 0.8mm wall.

 

Weiterführende Links zu "3DSolex CHT Matchless Nozzle 1.75 - 0,25mm"
15-25 Tage Lieferzeit
20 verfügbar
PolyTerra Sunrise-Orange Polymaker PolyTerra PLA Sunrise Orange 1kg
Inhalt 1000 Gramm
19,65 € *
5 - 10 Tage Lieferzeit
PolyTerra Fossil-Grey Polymaker PolyTerra PLA Fossil Grey 1kg
Inhalt 1000 Gramm
19,65 € *
73 verfügbar
19 verfügbar
5-10 Tage Lieferzeit
8 verfügbar
Polymaker PC-FR Filament True Black 1000g Polymaker PC-FR Filament True Black 1000g
Inhalt 1000 Gramm
55,99 € * 58,95 € *
19 verfügbar
13 verfügbar
PolyMaker PolyMax PLA Teal in 750g PolyMaker PolyMax PLA Teal in 750g
Inhalt 750 Gramm
44,20 € *
58 verfügbar
1 verfügbar
44 verfügbar
10-15 Tage Lieferzeit
10-15 Tage Lieferzeit
15-25 Tage Lieferzeit
5-10 Tage Lieferzeit
20-40 Tage Lieferzeit
Phrozen Sonic Mega 8K LCD 3D-Drucker Phrozen Sonic Mega 8K LCD 3D-Drucker
2.299,00 € * 2.329,00 € *
5-10 Tage Lieferzeit
PolyMide_PA6-CF_-Black_175_Spool PolyMide PA6-CF Filament Black 500g
Inhalt 500 Gramm
54,99 € *
12 verfügbar
PolyFlex-TPU95-HF-White PolyMaker PolyFlex TPU95-HF White 1000g
Inhalt 1000 Gramm
49,12 € *
56 verfügbar
PolyTerra Arctic-Teal Polymaker PolyTerra PLA Arctic Teal 1kg
Inhalt 1000 Gramm
19,65 € *
5 - 10 Tage Lieferzeit
PolyTerra Fossil-Grey Polymaker PolyTerra PLA Fossil Grey 1kg
Inhalt 1000 Gramm
19,65 € *
92 verfügbar
PolyTerra Charcoal-Black Polymaker PolyTerra PLA Charcoal Black 1kg
Inhalt 1000 Gramm
19,65 € *
PolyMaker PolyFlex TPU90 Teal PolyMaker PolyFlex TPU90 Teal 750g
Inhalt 750 Gramm
39,29 € *
5-10 Tage Lieferzeit
Polymaker_PC-PBT_Black_175_Spool_Picture_Asymmetric-2-700x700 Polymaker PC-PBT Filament Schwarz 1000g
Inhalt 1000 Gramm
55,99 € * 58,96 € *
36 verfügbar
iBridger PETG grey filament 1kg 1,75mm iBridger PETG grey filament 1kg 1,75mm
Inhalt 1000 Gramm
32,05 € * 42,73 € *
4 verfügbar
3 verfügbar
2 verfügbar
5-15 Tage Lieferzeit
5-10 Tage Lieferzeit
8 verfügbar
Polymaker PC-FR Filament True Black 1000g Polymaker PC-FR Filament True Black 1000g
Inhalt 1000 Gramm
55,99 € * 58,95 € *
19 verfügbar
5-15 Tage Lieferzeit
PolyMaker PolyCast Filament Natural 750g PolyMaker PolyCast Filament Natural 750g
Inhalt 750 Gramm
51,99 € * 54,03 € *
8 verfügbar
PolyMaker PolyFlex 95A True Black 750g PolyMaker PolyFlex 95A True Black 750g
Inhalt 750 Gramm
34,36 € *
13 verfügbar
PolyMaker PolyMax PLA Teal in 750g PolyMaker PolyMax PLA Teal in 750g
Inhalt 750 Gramm
44,20 € *
5-10 Tage Lieferzeit
5-10 Tage Lieferzeit
Zuletzt angesehen