3DSolex CHT Matchless Nozzle 1.75 - 0,40mm

3 verfügbar
3DSolex CHT Matchless Nozzle 1.75 - 0,40mm
16,66 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage
Artikelbestand: 3 verfügbar

  • 3 verfügbar
  • 3dsol4nm
  • 7072482002028
  • 84779080
Fits: Raise3D N1 / N2 Nozzle diameter: 0,40mm Filament diameter: 1,75mm   Ramp up... mehr
Produktinformationen "3DSolex CHT Matchless Nozzle 1.75 - 0,40mm"

Fits: Raise3D N1 / N2

Nozzle diameter: 0,40mm

Filament diameter: 1,75mm

 

Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.

Available Nozzles

0.25 mm (not Matchless, as the core heating will have little effect at the low throughput of this tiny nozzle)

0.40 mm (Matchless; core heating)

0.60 mm (Matchless; core heating)

0.80 mm (Matchless; core heating)

The nozzles are brass, and are coated with a layer to prevent them from reacting with the aluminium block.
This ensures that you can change nozzles without fear of destroying the heater block.

Tools

Recommended tool: Nozzle Changer for Prusa I3

What it does

This Nozzle allows “volcano-speeds” by just changing the nozzle (0.25 makes no difference). The Matchless nozzles, patented by 3D Solex, have a melting zone much bigger than an ordinary nozzle. An ordinary nozzle is melting the filament from the “outside” and trying to push the coldest part (centre of filament) through the exit hole of the nozzle.
The core heating effect of the Matchless nozzles is melting the middle  of the filament, that part which you wish to push out through the nozzle.

What the others must do: Lengthening the heating zone, which has a negative effect on retractions, adds weight to the head and is costly.

Advantages

1) You can now change nozzle risk free and hazzle free, by using the tool available separately. Change nozzle in seconds, without risk of destroying the sensors of the printer or the heat break.

2) Print with a much higher troughput, by configuring a combination of :

a) nozzle size

b) layer height

c) printing speed.

3) Print with a lower temperature. Since you are effectively melting the plastic you can print at a lower temperature than before. Using the existing settings of your previous print, you can lower 5-15 C.

4) Wide range of nozzles sizes (mm) available from 3D Solex:

0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.2, 1.5, 2.0

Example: You can now print a vase with a 0.80mm nozzle at the same or higher speed than you could using a 0.40mm nozzle previously. This way you only need 1 pass to make a 0.8mm wall.

 

Weiterführende Links zu "3DSolex CHT Matchless Nozzle 1.75 - 0,40mm"
272 verfügbar
10-20 Tage Lieferzeit
19 verfügbar
875 verfügbar
PolyTerra Cotton-White Polymaker PolyTerra PLA Cotton White 1kg
Inhalt 1000 Gramm
19,65 € *
270 verfügbar
58 verfügbar
41 verfügbar
221 verfügbar
331 verfügbar
7 verfügbar
55 verfügbar
75 verfügbar
44 verfügbar
105 verfügbar
Raise3D R3D PVA+ Filament 750g 1,75mm Raise3D R3D PVA+ Filament 750g 1,75mm
Inhalt 750 Gramm
130,89 € *
5-10 Tage Lieferzeit
5-10 Tage Lieferzeit
57 verfügbar
22 verfügbar
78 verfügbar
PolyTerra Mint Polymaker PolyTerra PLA Mint 1kg
Inhalt 1000 Gramm
19,65 € *
10-20 Tage Lieferzeit
30-45 Tage Lieferzeit
30-45 Tage Lieferzeit
5-15 Tage Lieferzeit
Polymaker PolyLite PETG Grey Filament 1000g Polymaker PolyLite PETG Grey Filament 1000g
Inhalt 1000 Gramm
ab 29,45 € *
77 verfügbar
37 verfügbar
331 verfügbar
10-25 Tage Lieferzeit
Zaxe Z3 3D Drucker Zaxe Z3 3D Drucker
4.520,81 € *
75 verfügbar
9 verfügbar
PolyMax-PC-Black-3kg PolyMaker PolyMax PC True Black 3000g
Inhalt 3000 Gramm
167,14 € *
15-25 Tage Lieferzeit
5-10 Tage Lieferzeit
Zuletzt angesehen