INTAMSYS Ultem 1010 1.75mm 500g

INTAMSYS Ultem 1010 1.75mm 500g
Dieser Artikel steht derzeit nicht zur Verfügung!
119,00 € *

inkl. MwSt. zzgl. Versandkosten

Lieferzeit 10-15 Werktage

ULTEM Farbe:

  • INTAM_ULTEM1010
  • 39169050
Ultem® 1010 PEI (Polyether Imide) is an amorphous, high-performance polymer that combines... mehr
Produktinformationen "INTAMSYS Ultem 1010 1.75mm 500g"

Ultem® 1010 PEI (Polyether Imide) is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance.  Ultem® resin offers the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217°C.

Product attributes include:

  • High thermal properties: (Tg) of 217°C
  • Inherent flame resistance
  • Long-term hydrolytic stability
  • Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
  • Exceptional strength and modulus, even at elevated temperatures

Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions

Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
Automotive / Transportation Applications:  Ultem® resins provide automotive manufacturers with a high performance, chemically resistant, thermally-stable, cost-effective alternative to metal that is strong enough to replace steel in some applications and light enough to replace aluminum in others. For applications like transmission components, throttle bodies, ignition components, sensors and thermostat housings,

Electrical / Electronics Applications:  Ultem® resin may be an excellent material choice for today’s demanding electrical applications, including connectors, MCB components like housings, shafts and levers, hard disk drive internals, FOUP’s, BiTS, PCB’s, MCCB internals, Plenum devices, LCD projector internals, fuel cell components and many other applications.

Filament Specifications:

  • Diameter:  1.75mm (+/- 0.05mm)
  • Colors:  Natural and Black

Recommended Print Conditions:

  • Extruder Temp: 330 – 350°C (all-metal extruder)
  • Bed Temp: 110 – 120°C
  • Bed Prep: Ultem® Tape, Polyimide Tape, Lightly sanded FR4 or Perf board.
  • Other:  No cooling fan, Print speeds of 1000mm/min (starting point)

 

Extruder Temperature

330 – 350°C (all-metal extruder)

Bed Temp

110 – 120°C

Weiterführende Links zu "INTAMSYS Ultem 1010 1.75mm 500g"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "INTAMSYS Ultem 1010 1.75mm 500g"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.
Bitte geben Sie die Zeichenfolge in das nachfolgende Textfeld ein.

Die mit einem * markierten Felder sind Pflichtfelder.

weitere Farben
Zuletzt angesehen