PEI Build Plate (E Series)

Print Area:
365 × 240 mm

Printer Compatibility:
Raise3D E2, Raise3D E2CF, Rai

Included:

• 1 × PEI Build Plate (for E2 and E2CF only)

Product Description:
The PEI Build Plate (for Raise3D E2 and E2CF only) is made of high-strength spring steel with a double-sided PEI powder coating. It offers high temperature resistance, excellent flame retardancy, great strength, and rigidity.

Benefits:

• Double-sided PEI coating – both sides can be used for printing, ensuring long service life.
• High flatness and a flexible structure allow easy model removal – simply bend the plate gently.
• Heat-resistant, flame-retardant, robust, and dimensionally stable.
• Compatible with a wide range of filaments.
• Strong first-layer adhesion (for some materials, additional glue may be required).

For details on filament compatibility and glue usage, please refer to the material compatibility list.

Notes:

• After applying the PEI Build Plate, the nozzle height must be recalibrated. Please follow the specific instructions for your model: E2 | E2CF.
• The current slicing profiles for the E2 and E2CF are compatible with the PEI Build Plate.
• Dust, grease, and print residue may reduce adhesion. Clean the surface regularly with mild detergent (e.g., alcohol and water). Avoid harsh cleaners or acetone as they can damage the PEI surface.
• If adhesion is reduced, carefully sand the textured PEI surface with fine sandpaper (recommended: 600 grit).
• The PEI coating may leave a texture on the bottom of printed parts. For a smooth finish, a raft is recommended – note the increased material use and potential risk of model damage during raft removal (especially for thin walls).
• Avoid using a spatula to remove printed parts – this could scratch or damage the PEI surface or cause the coating to peel off.

Safety Warnings:

• The edges of the build plate may be sharp – handle carefully to avoid injury.
• Do not touch the plate with bare hands during printing.
• After printing, the plate is extremely hot – wait until it has cooled to room temperature before removing it.