PolyMaker PolyMide™ PA6-GF Filament Grey 2000g

Nozzle Temperature:
280˚C – 300˚C *

Printing Speed:
60mm/s

Bed Temperature:
25˚C – 50˚C (Do NOT exceed 50 ˚C)

Bed Surface:
almost any surface with a thin coat of PVA glue or Magigoo PA

Cooling Fan:
OFF

Based on 0.4 mm nozzle and Simplify 3D v.4.0. Printing conditions may vary with different printers and nozzle diameters
* We highly recommend to use a wear resistant nozzle

Young’s Modulus:
4431 ± 184 (MPa)

Tensile Strength:
84.5 ± 2.1 (MPa)

Bending Strength:
136.4 ± 1.6 (MPa)

Charpy Impact Strength:
16.5 ± 0.5 (kJ/m2)

Heat Deflection Temperature
(ISO 75 1.8 MPa):
124 ˚C

Heat Deflection Temperature
(ISO 75 0.45 MPa):
191 ˚C

Melting Temperature:
215 (°C)

Drying Settings:
80˚C for 12h

Recommended Support Materials:
PolyDissolve™ S1

Other:
N/A

TDS:
DOWNLOAD

SDS:
DOWNLOAD

PIS:
DOWNLOAD