• Fast Delivery
  • Pay per Invoice
  • Service
  • Consulting

3DSolex CHT Matchless Nozzle 1.75 - 0,80mm

2 available
3DSolex CHT Matchless Nozzle 1.75 - 0,80mm
16.66€ *

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

  • 3dsol8nm
  • 7072482002042
  • 84779080
Fits: Raise3D N1 / N2 Nozzle diameter: 0,80mm Filament diameter: 1,75mm   Ramp up... more
Product information "3DSolex CHT Matchless Nozzle 1.75 - 0,80mm"

Fits: Raise3D N1 / N2

Nozzle diameter: 0,80mm

Filament diameter: 1,75mm

 

Ramp up plastic output thanks to our patented core heating nozzles and fully utilizing the Bondtech feeder already installed in your printer. By combining nozzle size, layer height and speed you can achieve up to 30 cubics / second.

Available Nozzles

0.25 mm (not Matchless, as the core heating will have little effect at the low throughput of this tiny nozzle)

0.40 mm (Matchless; core heating)

0.60 mm (Matchless; core heating)

0.80 mm (Matchless; core heating)

The nozzles are brass, and are coated with a layer to prevent them from reacting with the aluminium block.
This ensures that you can change nozzles without fear of destroying the heater block.

Tools

Recommended tool: Nozzle Changer for Prusa I3

What it does

This Nozzle allows “volcano-speeds” by just changing the nozzle (0.25 makes no difference). The Matchless nozzles, patented by 3D Solex, have a melting zone much bigger than an ordinary nozzle. An ordinary nozzle is melting the filament from the “outside” and trying to push the coldest part (centre of filament) through the exit hole of the nozzle.
The core heating effect of the Matchless nozzles is melting the middle  of the filament, that part which you wish to push out through the nozzle.

What the others must do: Lengthening the heating zone, which has a negative effect on retractions, adds weight to the head and is costly.

Advantages

1) You can now change nozzle risk free and hazzle free, by using the tool available separately. Change nozzle in seconds, without risk of destroying the sensors of the printer or the heat break.

2) Print with a much higher troughput, by configuring a combination of :

a) nozzle size

b) layer height

c) printing speed.

3) Print with a lower temperature. Since you are effectively melting the plastic you can print at a lower temperature than before. Using the existing settings of your previous print, you can lower 5-15 C.

4) Wide range of nozzles sizes (mm) available from 3D Solex:

0.25, 0.40, 0.50, 0.60, 0.80, 1.0, 1.2, 1.5, 2.0

Example: You can now print a vase with a 0.80mm nozzle at the same or higher speed than you could using a 0.40mm nozzle previously. This way you only need 1 pass to make a 0.8mm wall.

 

Related links to "3DSolex CHT Matchless Nozzle 1.75 - 0,80mm"
5-10 Days delivery time
5-10 Days delivery time
59 available
40 available
7 available
62 available
PolyMaker PolyBox™ Edition II PolyMaker PolyBox™ Edition II
Content 1 piece(s)
68.69€ *
4 available
BASF Ultrafuse Support Layer Filament BASF Ultrafuse Support Layer Filament 1,75 mm...
Content 300 Gramm
126.27€ * 140.30€ *
12 available
49 available
- 5.92 %
Capricorn XS-Serie PTFE-Bowdenschlauch für 1,75 mm Filament Capricorn XS 2 x 75cm 1.75mm PTFE Bowden Tubing...
Content 1 piece(s)
27.99€ * 29.75€ *
17 available
BASF Ultrafuse 17-4 PH Metal Filament 1,75mm 3000g BASF Ultrafuse 17-4 PH Metal Filament 1,75mm 3000g
Content 3000 Gramm
375.66€ * 417.40€ *
5-15 Days delivery time
- 5.12 %
Bundle Offer
31 available
- 20.92 %
60 available
5 available
BASF Ultrafuse 316L Metal Filament 1,75 mm 3.000 g BASF Ultrafuse 316L Metal Filament 1,75 mm 3.000 g
Content 3000 Gramm
450.89€ * 500.99€ *
14 available
- 0.81 %
Polymaker PolyTerra PLA Marble White 1,75mm 1kg Polymaker PolyTerra PLA Marble White 1,75mm 1kg
Content 1000 Gramm
19.49€ * 19.65€ *
6 available
3 available
7 available
14 available
Viewed